Home Aluminum Screens Distributors People Say Catalog Address Pictures Order EMAIL

Instructions made simple: So easy "a blank screen becomes a work of art" for setting up Micro Perfect Registration System:

Micro Perfect's Instructions

Page 1

1. Start with the Micro Perfect Grid Board:

Place one sheet of Mylar carrier sheet onto the grid board. The holes on the Mylar carrier sheet will perfectly match the pins on the grid board. Take the plastic (self-adhesive), hole strengtheners and them slip over each pin and fasten to the Mylar sheet. "This is a very important step because Mylar carrier sheets will expand after a few times on and off the pins." Tape the right side of the Mylar carrier sheet to the right side of the grid board with masking tape. Align your first piece of artwork. Tape the artwork to the Mylar carrier sheet with clear tape. Never use masking tape.

For the second piece of artwork, repeat steps above. The second piece of masking tape should be in a different location. After the artwork is set up, remove the second Mylar carrier sheet with your artwork taped to it and repeat this method for all additional artwork until all positives are ready for burning. Use a maximum of two sheets of Mylar carrier sheets on the pre-registration grid board at one time.

nextClick here for the next page.

nextReturn to the Home Page.