Screen Printing Work of Art (cont.)

Micro Perfect's Instructions

Page 2

2. Mount each positive to register holes on Micro Bar on screen.

1. Place the registration tabs through the holes, on the Mylar carrier sheet, and gently push the tabs into the holes on the Micro Perfect Bar Attachment.
2. Tape the opposite edge of the Mylar flat against the screen using a clear tape to insure it is perfectly flat.

1. Burn screen according to your standard procedures.

4. Wash out screens.

1. Remove the clear tape.
2. Remove the registration tabs.
3. Remove the Mylar carrier sheet with artwork attached and wash screen according to your standard procedures.

5. Setting up the press.

1. Align and level press arms.
2. Set the Micro Perfect Shirt board and mount onto the press arm.

Click here for the next page.

Click here for the List of Instructions.

Click here for previous page.

Return to the Home Page.